Pink and purple are swapped left door to right door, but I believe that is for the LED adjustment motor. I noticed this when I re-pinned using the 10 pin connector. I still have to run two wires to each door, so I'll get pinouts and colors tomorrow for you.
What is this blue and red together stuff? I didn't have to splice anything and all the mirror functions work properly. I do have D-F mirrors though, so maybe it's an A-C thing? I have 9 wires available in my 10 pin connector.
EDIT:
I don't have a red wire. Blue for power only. LED's are green/white. Try swapping pink & purple.
EDIT2:
Ok, to quote a famous politician, "Let me be clear:"
The only things swapped left to right (driver to passenger) are the LED pins.
The A-C mirrors must have a different/extra power wire. My D-F mirrors only have 1 adjustment power wire, which is blue.
My driver's side JDM mirror has a pink wire for up/down, and a purple wire for left/right.
My passenger's side JDM mirror has a red wire for up/down, and a purple wire for left/right.
If you have both a pink and a red wire, you may have two power sources for adjustment.
If your vehicle has 7 pins in an 8 pin connector, you only have one power source for adjustment (Red/Blue).
If your vehicle has 8 pins in an 8 pin connector, you probably have two sources for power adjustment.
You should probably look at your vehicle and confirm this before ordering JDM mirrors, and confirm the number of pins in the mirror harness (9 pins or 10 pins).