Jump to content
LegacyGT.com

dale sand

I Donated
  • Posts

    18
  • Joined

Personal Information

  • Location
    Eau Claire, WI
  • Car
    2008 Spec B

dale sand's Achievements

Apprentice

Apprentice (3/14)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

0

Reputation

  1. That is correct it is an unused connector that is taped to the harness. TPMS was apparently an option on some of the H6 models but the connector is on all. The open end on the connector allows corrosion to grow on the fine contact connector. I found a nice green line growing across the face of the connector.
  2. On my wife's 06 2.5i wagon the battery was going down every 2 or 3 days of non use. I did some digging into it and found the info display was flashing ACC and some times ERR also the overhead airbag light was on 24/7. I discovered that there is a TSB for the TPMS connector on these MY that is not used in this version. The problem is it is tucked away under the drivers seat carpet and gets corrosion in the connector causing a resistance connection between contacts. The TSB say's to cut the green wire and tape it off. I did this and all is good!
  3. Dispatch20 I just picked up a 2011 Legacy homelink mirror with the display (Gentex) Question for you:Where did you get the harness with the 12 pin connector for video and wire it in? I've been looking around this evening but not finding much to go on. Thanks
  4. If you use Chrome try this, I can see the pics in the first post with it installed. https://chrome.google.com/webstore/d...fegnfnflicjjgj
×
×
  • Create New...

Important Information

Terms of Use