Jump to content
LegacyGT.com

Redline2083

Members
  • Posts

    29
  • Joined

Redline2083's Achievements

Explorer

Explorer (4/14)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

0

Reputation

  1. Yea quite smart *head down*. I am not tuned because im unable to access my ecu for some reason, not sure why and im only running water injection for now, no meth, So the car is extremely rich, running in 9's because the aem wideband is hold 10.0 flat on WOT. I'm in the caribbean so we get everything from japan, so the hatch is 07. i believe the japs got the legacy gt in 03 and the US in 05
  2. Ok i cleaned the MAF, checked the turbo hoses and one was off. After reconnecting it helped the sputtering partially. I think the water injection i have installed it blowing out the spark, im not sure why it wud be doing it all of a sudden now i've changed the plugs. Has me baffled! Whenever the water injection light comes on indicating its spraying, is when the sputtering begins. Anyone knows a good gap for the plugs with water injection installed? BTW i jus wanted to say i dragged an 07 hatchback sti saturday, and destroyed him. My car has everything stock except exhaust and boost controller.....NO TUNE. My car is rated 280hp in japan and his 305hp. Feels good to know i gave him 3-4 lengths in the 1/4mile before a tune . He doesnt feel good that a luxury ride kicked his ass lol....Now back to the topic at hand. The plugs!!!
  3. Hi there, I've had some slight sputtering recently under WOT, figured it was fouled plugs or something, so i changed the plugs, also cleaned the MAF sensor with MAF cleaner the same time. After i put everything back up, i've been getting ALOT of continuous sputtering when the car tries to build boost, and i dont know whats happening. I have no CEL or anything. THE CAR IS NOT BOOSTING PERIOD, just holding 0 on the boost controller. Im smelling gas and the car seems to be running extremely rich Defi boost gauge: Jus holding one position slightly above zero and not moving Greddy Profec 2 BC: is displaying negative numbers and as soon as it hits zero to build boost the sputtering begins again Could it be a coilpack, plug, bad maf sensor?? Where do i start?? Btw this is the jdm 2.0 turbo. Can someone plzzzzzz help???
×
×
  • Create New...

Important Information

Terms of Use