duds... adj789 .... Bpalumbo159 ..... if you cant make the cable to work make sure you did this... this is what i did to make it work- with my 4th generation legacy
i used that vag com cable with BL chip inside... laptop with winXP 32bit updated all the JAVA software plus those advanced java SE-JRE things...
cdm 2.08... WHQL certified whatever latest cable driver...
*when i connected the cable to the car and laptop and blue light flashed, windows tried to install the drivers for the device then i manually selected this whql certified folder and it installed everything from that.
if you have this WHQL driver installed correctly in device manager under COM ports it should show this cable as comport3 or 4 or whatever and it should not have question mark or anything on it.
used latest RR with latest definitions then connected both sides of the cable in the car then start the car and then start RR log... simple as that.
make sure all the definitions are in proper places and locations are selected in ecuflash and RormRaider.
------- i had trouble with ecuflash (also used latest ecuflash, latest drivers and definitions for it) i could not read the rom. turns out this car has 2 pairs of green test connectors - one is under the glove box one next to the pedals. one under the glove box needs to be connected when using ecuflash then disconnected when you are done with it.