View Full Version : Plug diagram for the 2007 Spec B radio?
I'm trying to hook up some gauges, and was going to use the radio for power, ground, etc. Does anyone have the pin out for the radio, or know which wire is what? I need a ground, constant 12v, and switch 12v. Thanks
Jim
Jon [in CT]
01-13-2007, 06:27 PM
Can you can post a legible picture of the label on the bottom of the chassis? It should look like this:
http://i4.ebayimg.com/05/i/000/81/12/a572_1.JPG
Even if you can't, simply reporting the Model No. and Ref.No. would be OK and would prompt me to dig up the info you're after. :)
I was trying to take apart the dash a little as possible :p. I'll try to get you a picture at some point. Don't have a lot of free time for the next week or so though. It should be the same as an 05-06, since the 07 radio is plug and play with those years.
Jon [in CT]
01-14-2007, 08:20 AM
It should be the same as an 05-06, since the 07 radio is plug and play with those years.It's not the same.
Deer Killer
01-14-2007, 11:26 PM
This is what you are looking for, no?
http://www.geocities.com/svxdc/WRX-pinout.htm
I'll look and see if that'll work. Thanks :) If not, I'll still post the picture of the part numbers
Deer Killer -
I believe that diagram will work for me, thanks :)
Jon-
The part numbers on the label are :
MODEL NO: 86201AG67A
REF NO: CQ-EF1661X