PDA

View Full Version : Need help with legacy acc!

Burton
12-31-2006, 05:33 AM
I've bot this to change my music system in my Subaru legacy spec B:

http://www.subaruparts.ru/i/cat/item/283_2.jpg

and 2 din board

i thought that it would be like on your photos, but when i opened the box i found that it is black (ACC unit)

The problem is that it shows the temperature, mode etc but it doesn't respond to my actions. I push buttons but nothing happens. I'll make photos an maybe videos today.

My legacy is LHD like most cars in Russia. =)
Magic
12-31-2006, 08:05 AM
Thats not designed for our cars ...return it
heightsgtltd
12-31-2006, 08:08 AM
he has a 3.0 spec B, a model we dont have here, e.g. non USDM.

Maybe they dont have the dual ACC like we do here.
Magic
12-31-2006, 08:23 AM
OOPS...didnt know that....oh well, doesnt work, return it
unclemat
12-31-2006, 09:20 AM
he has a 3.0 spec B, a model we dont have here, e.g. non USDM.

Maybe they dont have the dual ACC like we do here.

The unit in the picture is single ACC. Perhaps the guy has dual ACC? (I am pretty sure EDM 3.0R SpecB has dual ACC).
Burton
12-31-2006, 10:08 AM
I have a single zone ACC it is sure, the head unit is similar to this: http://legacygt.com/forums/attachment.php?attachmentid=7795&d=1119608980

and this black acc head unit is for single zone Acc. It is similar to this one but isn't the same :

http://www.legacygt.com/forums/attachment.php?attachmentid=26509&d=1161987331
Burton
12-31-2006, 10:17 AM
Do i have to change anything to install it, or it should be connected to the original plug in the car without any changes?
pablo1b
01-01-2007, 10:54 AM
Do i have to change anything to install it, or it should be connected to the original plug in the car without any changes?

So, both your original head unit/AC face plate and the new AC only module are single zone? And both are in celcius?
unclemat
01-01-2007, 10:54 AM
C/F units are controlled by the gauge cluster, not ACC controls.
Burton
01-01-2007, 03:37 PM
YEP! They're both single zone and in celcius! This acc unit is normally for Australia. My car is 05my and this plate is for cars of 07my. Maybe that is the problem. Photo, mobile phone quality, sorry.

http://burtonsubaru.narod.ru/index.html
unclemat
01-01-2007, 03:41 PM
Yes, likely this is the problem. There is the similar accessory specifcialy for A-C revision cars (pre MY2007).
Burton
01-01-2007, 03:51 PM
Could someone give me pinout of the acc plug maybe i'll find the solution?
Burton
01-02-2007, 09:07 AM
Hey guys, that would help many people to understand wheather it is possible to use 2 din plate and acc unit in LHD legacy!
a.latypov
01-04-2007, 08:24 AM
YEP! They're both single zone and in celcius! This acc unit is normally for Australia. My car is 05my and this plate is for cars of 07my. Maybe that is the problem. Photo, mobile phone quality, sorry.

http://burtonsubaru.narod.ru/index.html

All Legacies’ for European market before 2007MY have single zone ACC and have silver faceplate. Last restyling i.e. 2007MY have dual ACC and faceplate colored in black. As I think if you want 2DIN you should ask seller to exchange console for single zone ACC in silver.
Burton
01-04-2007, 03:55 PM
The plate that i've purchased is SINGLE ZONE, but in black... If you look at the photo carefully you can see fan on the left and temp on the right, if it is dual zone acc it has temp on the left and on the right. See the difference between these two plates?

29910
29911

Does silver ACC work without any problems and need no efforts to install?